Garage Door Opener Maintenance: When to Get It Done

How often do you perform garage door opener maintenance? Most homeowners know the critical role the opener plays in a garage door system. Yet they do not give it a second thought unless it stops working properly. Your opener may be performing well, but it occasionally needs routine maintenance to keep it in good working order. Here are some indicators that tell whether your garage door opener needs maintenance.

How to Tell if You Need Garage Door Opener Maintenance?

The opener raises the door but will not close it

Sometimes, the opener will not close the door when it is supposed to. It could be because the safety sensor is malfunctioning, misaligned, or unplugged. When the sensor detects an obstruction in the door’s path, it alerts the motor to stop shutting to prevent accidents. Therefore, it is essential to check if anything obstructs the sensor or if its angle is off. If the sensor seems fine but the opener refuses to shut the door, call in a professional for an inspection.

The opener does not respond to the remote control or wall switch

When you press the button on your remote or press the wall switch, and the door does not budge at all, it could be any of the following causes:

• The motor has burned out.
• The remote control or wall switch has burned out.
• The circuit breaker has tripped due to a power loss, or a fuse has blown in the main power panel.

If it is not receiving power, you will need to contact a garage door professional. They can check your system for a short in the wiring or a loose connection at the wall outlets, breaker boxes, and circuit fuses.

The garage door reverses while closing

Two frequent issues might cause a garage door opening that reverses before touching the ground. Your opener has close-force (the amount of pressure the door exerts at the end of its travel) setting. The close-force setting could be too low or incorrect, leading the door to reverse when any resistance is detected. Another problem could be that rusty or damaged rollers cause the door opener to stop too soon.

The garage door reverses upon touching the floor

Your opener comes with a limit switch, which is responsible for controlling the length of travel of the door. If the door hits the floor before the preset distance has been traveled, the opener would think something is wrong and reverse to prevent any damage or safety risk. You can adjust the setting and make incremental changes until the door remains closed when it touches the floor.

The garage door does not fully close

Does your garage door fail to close completely? Check whether the limit switch is set correctly and there are no obstacles in the way of the safety sensors. Make sure the sensors are aligned and have enough area to work properly. And any broken or rusted parts that may prevent the door from closing properly should be replaced. 

The opener continues to run even after the door has opened or closed

This can happen when the gears inside the opener unit have been stripped and run without moving the door. The gears are attached to a pulley belt with a rotating dent. Because the belt cannot run freely, the opener remains engaged long after the door has been fully opened or closed.

Garage Door Opener Repair Near Me

Looking for a trustworthy garage door opener maintenance service? Omaha Garage Door Repair is the place to go. We provide comprehensive garage door opener repair, replacement, and maintenance services to keep your garage door working smoothly and safely. Our skilled professionals are ready to help with the best garage door repair service possible. To ask for free estimates, please contact us at (402) 819-5158.