Omaha Garage Door Repair

At Your Service Since 1997
Call Today: (402) 819-5158

Garage Door Maintenance Carter Lake

Garage Door Maintenance Carter Lake

Project Description

A client called us for garage door service in Carter Lake, IA. Their garage door made noise and jerky movement every time they opened and closed it. The homeowner admitted that it had not been serviced for a while, so they requested a maintenance service. First, we did a comprehensive 12-step inspection to check the garage door for mechanical and safety issues. We saw that the lifting cables had started to fray, so they needed replacement, as did the springs and rollers. So we replaced every component that needed replacing. Once everything was in place, we offered maintenance tips for lubricating garage door parts in case any similar issues happened again.

Though you rely on it daily, how often do you think about your garage door? The sad truth is, the garage door is not always top of mind—unless something is not working. Just as you would service a car, you must examine the condition of your garage door and its parts. Performing a garage door tune-up at least once yearly is advisable to maintain peak performance and ensure the safety and reliability of the system. A monthly check will ensure everything is in good condition, from the motor to the seals and hardware. You can do it yourself by checking these 12 things on the list.

12-Step Inspection for Garage Door Maintenance

Check if the Photo Eye Sensors Are Properly Installed

The photo eye sensors are located on each side of the garage door. Ensuring they are not installed more than 6 inches off the ground is important. Check whether the two are securely fastened to the wall and at the appropriate height. That way, you can make certain they will work optimally.

Test the Photo Eye Sensors Are Working

To assess the performance of the photo eye sensors, try this test:

Place an object taller than 6 inches at the opening of your garage door and ensure it blocks one of the sensors. Next, close the door remotely with your garage door opener. The photo eye should stop the door from closing and force it to reverse.

Test the Automatic Safety Reverse on the Garage Door

Your garage door's automatic reverse feature must work properly to ensure safety. To do this:

  • Put something at least 1.5 inches tall at the garage door's edge, like a wood plank.
  • Press the close button. When the door meets the object, it should stop closing and begin to open again.
  •  

    If you have any problems with the photo eye sensors while inspecting, immediately contact a repair company like Omaha Garage Door Repair.

    Test the Garage Door's Balance

    Test the garage door's balance at least once a year to ensure it functions properly. A garage door that is out of balance will work against the springs, which can lead to a possible garage door failure.

    Also included in our checklist for a 12-step inspection of garage doors are the following: 

  • Assess the strength and safety of the garage door springs.
  • Check the pulleys' condition.
  • Inspect the appearance of the lifting cables.
  • Examine the garage door rollers.
  • Assess the top and bottom fixtures of the garage door.
  • Check the condition of the hinges.
  • Inspect the bottom weather seal for damage.
  • Ensure the perimeter weather seal is intact.
  •  

    Garage Door Maintenance Near Me

    Are you stuck outside your home because the garage door is not working? Or are you dealing with a malfunctioning garage door when it is late at night or early in the morning? Then it is time to schedule a regular garage door tune-up with a reputable garage door Omaha service provider. 

    At Omaha Garage Door Repair, we inspect your garage door and make sure it is trouble-free. We commit to providing you with the highest customer service and a strong desire to help you keep your garage safe and secure. Call us today at (402) 819-5158 or request a quote here.

    Share this Project

    LinkedIn
    Call Now ButtonCall Now