Garage Door Opener Repair Papillion

The homeowner in Papillion, Nebraska, was very upset when their garage door was not going down when they pressed the remote or wall control button. They also noticed the garage door opener light had flashed ten times. Worried about the possible risks of a broken opener, they called Omaha Garage Door Repair for help. Within an hour, our team arrived and inspected the garage door system. After a thorough check, we found the culprit. The sensors were misaligned along with damaged wires. That is why the garage door was not closing properly. Good thing the damage on the wires’ insulation has not yet caused a short circuit. If it was, the client could have faced a garage door motor repair, which is more costly. To fix the problem, we changed the sensors’ damaged wirings and then realigned the opener sensors. Then, we carefully adjusted the sensors for alignment to ensure a clear path for the sensor beam. Next, we gently cleaned the lenses of the opener sensors and ran some tests to make sure they worked. Thanks to our garage door opener repair service, they can finally rest easy knowing they have a smoothly running garage door.

A very important part of the opener system is the garage door sensor. It stops the door from going down if something is in its way. This feature keeps you, your pets, and your valuable things safe and the door from damage. A broken garage door sensor can be dangerous. So it is important to know what is causing it so you can have it fixed right away.

Why Garage Door Sensor Is Not Working

Is your garage door sensor not responding? Let us take a look at what could be causing the issue.

Check the alignment 

Look at the safety sensors on each side of the garage door and check if they are in line. The warning lights on the sensors should be solid, not blinking. Blinking lights indicate a misalignment problem. Adjust the sensors until the warning lights are on steady. Make sure they are completely straight by using a level.

Clean the sensors 

Dust, dirt, or other things on the sensors can block the beam and cause problems. Clean the eyes of the sensors with a soft, lint-free cloth. Make sure no objects or spider webs are blocking the sensors. Clean up the area near the sensors.

Check the wiring 

Look at the wires that connect the sensors to the garage door opener unit. Make sure the wires are connected well and are not broken. Loose or broken wires can make the sensor stop working.

Clear the way

Ensure no items, debris, or anything else block the path between the safety sensors. Even small objects can stop the door from closing by blocking the sensor beam.

Test the sensors by closing the door with the wall button or remote control while the door is fully open. Move a long object, like a broom, in front of one of the sensors while the door closes. The door should stop moving right away. If it does not reverse or does it too late, you may need to adjust or replace the sensors.

If you have tried these steps and the sensor problem is still there, it is best to call a skilled garage door technician. They can give you more help and ensure the sensors are fixed or changed correctly, if necessary.

Garage Door Opener Repair Near Me

Is your garage door broken? If you are unsure what is wrong with your garage door, we can help. Our experts at Omaha Garage Door Repair can resolve any problems with garage doors efficiently and effectively. With more than a decade of experience in the garage door industry, you can rely on us to complete the job on our first visit. We provide installation, garage door opener repair, maintenance, and assistance for any garage door issues. Give us a call now to get free estimates.